It adopts advanced sealing technology to prevent leakage and extend service life. The sealing gap can be automatically compensated with the use process.
Gaofu combines ultrasonic and vibrating screens to solve the problem of difficult screening of highly adsorbent materials.
It can screen 6 particle sizes, and the sieve body diameter ranges from 600mm (24 inches) to 2600mm (104 inches)
The materials are always under positive pressure during the screening process. The materials to be screened and a large amount of dust are pressed into the screen body through the feed port and enter the mesh cage. The finished products quickly pass through the mesh under the action of positive pressure. The remaining gas is dissipated through the bag dust collector and suction device of the silo. 10mg/m³, solves the problem of dust flying
It is suitable for single-layer screening and filtration by manufacturers in various industries to process materials with low production volume or low impurities.
When two vibrating motors installed longitudinally on the screen body run relative to each other, the horizontal excitation forces generated by them cancel each other out due to the relative operation of the motors, and the longitudinal excitation force is transmitted to the entire screen box through the vibration transmission body. The screen surface is vibrated, so that the materials on the screen surface are subject to the excitation force and jump on the screen surface in the direction of the discharged product. The materials smaller than the screen hole fall to the lower layer through the screen hole, and then jump from The discharge port flows out. Due to the reasonable screening process, after the materials are classified by the vibrating screen, several materials with different particle sizes can be obtained to complete the material classification operation.
Impurities and foreign matter are separated and discharged to the slag discharge port. The safety officer of the production line
The in-line screen uses a high-frequency vibration motor as the excitation source. After the material enters the system, it undergoes a three-dimensional rotational movement on the screen surface due to the force of the vibration source. The flour and agglomerates are fully dispersed, and quickly pass through the screen and directly enter the lower noodle bin. Impurities and foreign matter are separated and discharged to the slag discharge port, playing the role of “quality assurance officer” on the production line.
The in-line screen can be used in the feeding system at the front end of production lines such as instant noodles, dried noodles, snacks, solid beverages, etc. to separate foreign matter in raw materials (flour, starch, milk powder, additives, etc.). Because it is connected in series in the system and automatically separates foreign matter, it is known as the “quality assurance officer” of the food production line. The flour sifter can replace the manual observation of finding foreign matter and sorting it.
It has unique effects on the screening and classification of powdery and granular materials.
