Home / Solutions / Chemical industry solutions / Fertilizer
Chemical fertilizers refer to fertilizers that are manufactured or mined by chemical methods and processed.
They are also called inorganic fertilizers, including nitrogen fertilizers, phosphate fertilizers, potassium fertilizers, micro-fertilizers, compound fertilizers, etc.
They have the following common characteristics: simple ingredients, nutrient High content; fast fertilizer effect and strong fertilization; some fertilizers have acid-base reaction; generally do not contain organic matter and have no effect of improving soil and fertilizing.
Material name: Urea
Screening aperture: 2mm
Demand capacity: 5-10 tons/hour
Screening purpose：Remove fine powder produced by granulation
Material name：Fertilizer raw materials
Screening aperture：20 mesh
demand capacity：10-20 tons/hour
screening purpose：Foreign matter and impurities in raw materials
Mixing--granulation--drying--cooling--screening--finished product packaging
Chemical fertilizers refer to fertilizers that are manufactured or mined by chemical methods and processed. They are also called inorganic fertilizers, including nitrogen fertilizers, phosphate fertilizers, potassium fertilizers, micro-fertilizers, compound fertilizers, etc.
They have the following common characteristics: simple ingredients, nutrient High content; fast fertilizer effect and strong fertilization; some fertilizers have acid-base reaction; generally do not contain organic matter and have no effect of improving soil and fertilizing.
It adopts advanced sealing technology to prevent leakage and extend service life. The sealing gap can be automatically compensated with the use process.
When two vibrating motors installed longitudinally on the screen body run relative to each other, the horizontal excitation forces generated by them cancel each other out due to the relative operation of the motors, and the longitudinal excitation force is transmitted to the entire screen box through the vibration transmission body. The screen surface is vibrated, so that the materials on the screen surface are subject to the excitation force and jump on the screen surface in the direction of the discharged product. The materials smaller than the screen hole fall to the lower layer through the screen hole, and then jump from The discharge port flows out. Due to the reasonable screening process, after the materials are classified by the vibrating screen, several materials with different particle sizes can be obtained to complete the material classification operation.