Focus On Screening

Made in China, World Power


Vibrating screen common faults and troubleshooting

Post Date: 2018-07-10

Vibrating screen often appear in the failure and troubleshooting methods in the work process :
Symptom 1: can not start or amplitude is small
Reason: 1) The motor is damaged
2) Control circuit in the electrical components damaged
3) Insufficient voltage
4) the material accumulation too much above screen surface
5) Vibrator malfunction
6) vibrator grease thickening block
Method of exclusion:
1) Replace the motor
2) Replace the electrical components
3) change the power supply
4) clean material above the screen surface
5) Repair vibrator
6) Wash the vibrator, update and add the appropriate grease
Symptom two: abnormal material flow movement
the reason:
1)did not find the right sieve box lateral horizontal
2) supporting spring steel Stiffness too large or damaged
3) screen mesh broken
4) Feeding is extremely unbalanced
1) Adjust the bracket height
2) Adjust the spring
3) Adjust the screen surface
4) uniform operation, stable feed
Symptom III: vibrating screen accuracy is poor
the reason:
1) The mesh is blocked
2) material moisture increase after feeding
3) uneven feeding machine
4) The screen surface layer is too thick
5) Screen pull is not tight, the drive belt is too loose
1) uniform operation, stable feeding
2) to reduce the vibrating screen machine load and clean the screen surface
3) Change the angle of sieve box
4) Adjust the feeding of sieve machine
5) to reduce the feeding machine sieve
6) Tension the screen and tighten the drive belt
Symptom four: the screen rotation slow down in normal work, bearing fever
cause of issue:
1) Bearing lack of oil
2) Bearing blocked
3) Bearing overfilling or adding improper oil
4) bearing damage or poor installation, the eccentric wheel off, eccentric
1) Lubricate the bearing
2) Clean the bearings, replace the seal, and inspect the labyrinth seal
3) Check the bearing oil
4) Replace the bearing, install the eccentric block, adjust the round wheel
Through the above solution can solve the common failure of vibrating screen, if you have other problems can not be solved , please call us, we will try the best to help you!